Or Browse by Category
Showing only entries for Gas Fireplaces
Pilot Lighting Instructions for Heat-N-Glo Gas Fireplaces
Locate gas supply valve (typically behind louvers, below glass opening - may be red or blue).
Open valve by pivoting handle to be parallel to gas line.
Locate pilot assembly with spark ignitor (located behind and below logs in the firebox - typically Continue Reading
Pilot Lighting Instructions for Kozy Heat Gas Fireplaces
Open the lower grill and locate the gas value - your valve may be located behind a 'dashboard plate' and that will not interfere with the lighting of your pilot light.Locate the black knob on the left side (marked on/off/pilot). Push this button in and rotate counter-clockwise until the word Continue ReadingPilot Lighting Instructions for Napoleon Gas Fireplaces
For Your Safety, Read Before Lighting:A. This fireplace is equipped with a pilot which must be lit by hand. Lighting instructions must be followed exactly.B. Before operating, smell all around the fireplace area for gas and next to the floor because some gas is heavier than air and will settle on Continue ReadingPilot Lighting Instructions for Vermont Castings Gas Fireplaces
For Your Safety, Read Before Lighting:A. This fireplace has a pilot which must be lit manually. When lighting the pilot, follow these instructions exactly.B. BEFORE LIGHTING, smell all around the fireplace area for gas. Be sure to smell next to the floor because some gas is heavier than air and will Continue Reading